Place of Origin: | Guangdong, China |
Brand Name: | ShengHui |
Certification: | SGS |
Model Number: | SHMMCW-40 |
Minimum Order Quantity: | 1 Roll |
---|---|
Price: | USD 200/ Roll |
Packaging Details: | 1.52*18m |
Delivery Time: | 5-7 days |
Supply Ability: | 200,00 Rolls/Month |
Face Film:: | Polymeric Calendered Vinyl Film | Face Film Thickness:: | 4.8 MIL (120 µm) |
---|---|---|---|
Surface Finish:: | Matte Metallic | Adhesive Type:: | Clear Removable Acrylic Adhesive |
Adhesive Thickness:: | 30 µm | Release Liner:: | PET Release Liner/Air-Egress PE-coated Paper Liner |
Thickness:: | 60 µm/140gsm | Max Durability:: | Up To 5 Years |
High Light: | Heat Proof Car Wrap Roll,Matte Black Car Wrap Roll,Polymeric Calendered Vinyl Car Wrap Roll |
Product Name: Metallic Crystal Ceramic Matte Black Bubble Free Heat Proof Car Wrap Roll
Product Description:
Product Features:
Product Specfications:
1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
Surface Finish: | Matte | Color: | Matte Metallic | |
2. Adhesive | Type: | Clear Removable Acrylic Adhesive | ||
Thickness: | 30 µm | Color: | Clear | |
3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
4. Max Durability | Up to 5-7 years | |||
5. Product Size | Width | Length | ||
(metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) | |
1.27 | 50 | 18 | 20 | |
1.52 | 60 | 23 | 25 | |
Notice: There is a Minimum Order Requirement for Special Product Size. |
Product Application:
Advantages of Applying Car Wrap Film:
FAQs:
1.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.
3. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.
4.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
Contact Person: Drew zhu
Tel: +8613533241184