Yellow Metallic Matte Car Vinyl Wrap Self Adhesive 140gsm Thick

 Product Name:  Matte Metallic Yellow Car Wrap Film Air Release Swipeable

 Product Description:

• Car wrap film is a process of transforming the color and looks of your car by applying large sheets of pressure-sensitive vinyl film to each individual panel on the car. Carbon fiber vinyl wrap film is applied with extreme precision and skill and can only be carried out by highly trained and specialized staff.
• Self-adhesive with an air-release membrane for a super fast and bubble-free application! (Ready to use out of the box, no liquids needed!)

Product Specfications:

Product Features:

• Faster positioning and air bubble-free car wrapping film application
• Available in opaque and textured, special effect, and metallic options
• Exceptional durability and performance
• Long term removability after the intended period of use
• Excellent conformability around curves and recesses
• Even the most experienced applicators are more productive, compared to the standard permanent adhesive.

Product Application:

￭ Buses

￭ Trucks

￭ Vehicle advertising

￭ Trailers

Advantages of Applying Car Wrap Film:

• The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
• Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
• Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
• Many of the styles can not be reproduced by paint.
• Adds to the resell value of your car. When you remove it, your paint is in the same condition as on the day it was wrapped. Thus adding to the resale value by having flawless paint on your car. A repainted car normally decreases the value of your vehicle due to concerns over possible previous accident(s).
• Vinyl car wraps protect your OEM paint and are 100% removable.
• Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.
• You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
• Hides scratch, small chips, and “freshens” the look of your vehicle.
• Matte-paint jobs can be brittle and chip easily, while vinyl is more durable and harder to scratch. In the event that repairs are needed, the part that was damaged can be easily replaced, providing a perfect match.

FAQs:

• How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.

• Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.

• How to remove vinyl from your car?

1.Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

4.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

• Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.